Panels

Honeycomb panels are used to “lighten and reinforce” stone materials.

Honeycomb panels are an excellent technical solution allowing stone to be used in situations where it would not otherwise be possible. The Application of honeycomb panels allows the stone thickness to be reduced to just a few millimeters, resulting in major economic benefits with no negative implications in terms of aesthetic appeal.

The products selected for our customers assure load reduction while maintaining the strength and beauty of the processed product.

Panels

Aluminium honeycomb panel with fibreglass skins

Ideal substrate for stone, ceramic, porcelain, quartz and many other materials. High stability and performance. Suitable for indoor and outdoor applications.

Core: aluminium honeycomb with cell diameter from 3 to 19 mm
Skins in epoxy resin-impregnated fibreglass: thickness 0.4 mm
Standard dimensions: 1250 x 2500 / 1550 x 3050 ; up to 2150 x 3200 / 4000 mm on request
Thickness: minimum 4 mm

Viscosity RE 1065 LY

450 / 650 mpAs

Ratio by weight

Initial viscosity

Open time

Thin film gel

Panels

Honeycomb panel with aluminium skins

Ideal substrate for stone, ceramic, porcelain, quartz and many other materials. Suitable for outdoor and indoor applications.

Core: aluminium honeycomb with cell diameter from 3 to 19 mm
Skins: thickness 0.5 / 0.8 / 1.0 – max 5 mm
Standard dimensions: 1250 x 2500 / 1250 x 3000 / 1500 x 3000; up to 2000 x 7000 mm on request
Thickness: minimum 4 mm

Viscosity RE 1065 LY

450 / 650 mpAs

Ratio by weight

Initial viscosity

Open time

Thin film gel

Panels

Polypropylene panel

Ideal substrate for all stone, ceramic, gres-porcelain, quartz materials, etc. Extremely strong and impermeable, does not absorb water, suitable also for backlighting.

Polypropylene honeycomb core: density 80 kg/m3
Skins: in epoxy resin-impregnated fibreglass, 500 gr/m2
Standard dimensions: 1500 x 3000 mm standard; other sizes available on request
Thickness: from 6 mm to 60 mm

Viscosity RE 1065 LY

450 / 650 mpAs

Ratio by weight

Initial viscosity

Open time

Thin film gel

Panels

PET foam panel with fibreglass skins

Substrate suitable for all stone materials, quartz, ceramic, porcelain and far more. Light, rigid and transparent. Especially indicated for backlighting.

Core: in white PET foam, density from 40 to 250 kg/m3
Skins: in epoxy resin-impregnated fibreglass, 500 gr/m2
Dimensions: 1000 x 2500 mm standard; other sizes available on request
Panel thickness: from 8 mm to 60 mm

Viscosity RE 1065 LY

450 / 650 mpAs

Ratio by weight

Initial viscosity

Open time

Thin film gel